Cameras / Canon / Canon Rebel T6s
Canon

Rebel T6s

Also known as EOS 760D · 8000D

Your Rebel T6s is tested and verified to work with our app. Download it, plug the camera in over USB or connect it over Wi-Fi, and you'll get a result.

Buy a licence to see your result.
Licences start from $5.99

Released February 2015 Rated 100,000 actuations Method USB or Wi-Fi

Requires Windows 10 or 11, or macOS 11.7.11 or later

Successfully tested on camera firmwares

  • 1.0.0
  • 1.0.1
Canon

Rebel T6s

Via USB
15,429 Shutter count
15% used of 100,000 rated
S/N148095323132 CheckedNovember 22, 2026 · 06:13
Canon

Rebel T6s

S/N148095323132

Shutter count

15,429
15% used of 100,000 rated
Photo actuations12,125
Live View sessions3,304
Live View photos1,932

Compared

Lightly used. Most others have shot more.

Typical range20,000 – 63,000
USB · fw 1.0.0 22 Nov 26
Camera reading card. Activate to flip it over

Get your shutter count

USB

USB direct read

Connect the Canon EOS 760D to your computer with a USB cable and the app reads the exact actuation count straight from the camera.

  1. 01In the camera menu, set Wi-Fi/NFC to Disable before connecting the USB cable. Leave it off during the USB check.
  2. 02Connect the camera to your computer with a USB data cable, straight into the computer rather than through a hub, and turn the camera on. This camera takes a Mini-USB cable.
  3. 03Open Camera Shutter Count and go to Check.
  4. 04When it shows Connected via USB, select Check.
  5. 05The count appears in the result card.
Wi-Fi

Wi-Fi read

The app can also read the Canon EOS 760D over Wi-Fi instead of a cable.

  1. 01In Camera Shutter Count, go to Settings > Check and turn on Wi-Fi Camera Discovery.
  2. 02In Camera Shutter Count, select Connect, then Step-by-step setup. The app walks you through the steps below.

On the camera

  1. 03Unplug the USB cable. The camera's Wi-Fi menu doesn't work while a cable is connected.
  2. 04If Wi-Fi is off, turn it on: Wi-Fi/NFC, then Enable.
  3. 05Press MENU and go to Wi-Fi function > Connect to smartphone.
  4. 06Select Camera access point mode > OK > Easy connection > OK.
  5. 07The camera now shows a network name (SSID) and a password. Leave that screen showing.

On this computer

  1. 08Open this computer's Wi-Fi settings. Choose the network name the camera shows and enter the password the camera shows.

That network has no internet. That's normal: stay on it until the reading is done.

Connect to the camera

  1. 09Windows Close EOS Utility and Photos first. Another app connected to the camera blocks the reading.
    macOS Quit EOS Utility, Image Capture and Photos first. Another app connected to the camera blocks the reading.
  2. 10In Step-by-step setup, click Connect while the camera shows that screen.

After the reading, the camera may show a connection error. The reading is already saved.

When you're done, rejoin your usual Wi-Fi network.

Check this camera from $5.99
Buy the app

Different Canon body?