EOS 760D
Also known as Rebel T6s · 8000D
Your EOS 760D is tested and verified to work with our app. Download it, plug the camera in over USB or connect it over Wi-Fi, and you'll get a result.
Buy a licence to see your result.
Licences start from $5.99
Requires Windows 10 or 11, or macOS 11.7.11 or later
Successfully tested on camera firmwares
- 1.0.0
- 1.0.1
EOS 760D
Shutter count
Compared
Right in the middle of the pack.
Get your shutter count
USB direct read
Connect the Canon EOS 760D to your computer with a USB cable and the app reads the exact actuation count straight from the camera.
- 01In the camera menu, set Wi-Fi/NFC to Disable before connecting the USB cable. Leave it off during the USB check.
- 02Connect the camera to your computer with a USB data cable, straight into the computer rather than through a hub, and turn the camera on. This camera takes a Mini-USB cable.
- 03Open Camera Shutter Count and go to Check.
- 04When it shows Connected via USB, select Check.
- 05The count appears in the result card.
Wi-Fi read
The app can also read the Canon EOS 760D over Wi-Fi instead of a cable.
- 01In Camera Shutter Count, go to Settings > Check and turn on Wi-Fi Camera Discovery.
- 02In Camera Shutter Count, select Connect, then Step-by-step setup. The app walks you through the steps below.
On the camera
- 03Unplug the USB cable. The camera's Wi-Fi menu doesn't work while a cable is connected.
- 04If Wi-Fi is off, turn it on: Wi-Fi/NFC, then Enable.
- 05Press MENU and go to Wi-Fi function > Connect to smartphone.
- 06Select Camera access point mode > OK > Easy connection > OK.
- 07The camera now shows a network name (SSID) and a password. Leave that screen showing.
On this computer
- 08Open this computer's Wi-Fi settings. Choose the network name the camera shows and enter the password the camera shows.
That network has no internet. That's normal: stay on it until the reading is done.
Connect to the camera
- 09Windows Close EOS Utility and Photos first. Another app connected to the camera blocks the reading.
macOS Quit EOS Utility, Image Capture and Photos first. Another app connected to the camera blocks the reading. - 10In Step-by-step setup, click Connect while the camera shows that screen.
After the reading, the camera may show a connection error. The reading is already saved.
When you're done, rejoin your usual Wi-Fi network.
On the camera
- 03Unplug the USB cable. The camera's Wi-Fi menu doesn't work while a cable is connected.
- 04If Wi-Fi is off, turn it on: Wi-Fi/NFC, then Enable.
- 05Press MENU and go to Wi-Fi function > Connect to smartphone.
- 06Select Infrastructure mode.
- 07Choose your Wi-Fi network on the camera and enter its password there.
On this computer
- 08Make sure this computer is on the same Wi-Fi network as the camera.
Connect to the camera
- 09Windows Close EOS Utility and Photos first. Another app connected to the camera blocks the reading.
macOS Quit EOS Utility, Image Capture and Photos first. Another app connected to the camera blocks the reading. - 10Keep the camera on its connection screen. In Step-by-step setup, click Connect once the camera is found.
After the reading, the camera may show a connection error. The reading is already saved.
When you're done, rejoin your usual Wi-Fi network.