GFX100 II
Your GFX100 II is tested and verified to work with our app. Download it, plug the camera in over USB or drop in a photo, and you'll get a result.
Buy a licence to see your result.
Licences start from $5.99
Requires Windows 10 or 11, or macOS 11.7.11 or later
GFX100 II
Shutter count
Compared
Right in the middle of the pack.
Get your shutter count
USB direct read
Connect the Fujifilm GFX100 II to your computer with a USB cable and the app reads the exact actuation count straight from the camera.
- 01Before checking, set the camera to still-photo mode, choose NETWORK/USB SETTING > SELECT CONNECTION SETTING > 3: USB TETHER SHOOTING AUTO, and check that NETWORK/USB SETTING > USB POWER SUPPLY/COMM SETTING is set to AUTO or POWER SUPPLY OFF/COMM ON. Turn the camera off. Connect a USB cable. Turn the camera on.
- 02Connect the camera to your computer with a USB data cable, straight into the computer rather than through a hub, and turn the camera on.
- 03Open Camera Shutter Count and go to Check.
- 04When it shows Connected via USB, select Check.
- 05The count appears in the result card.
EXIF file drop
Drop any unedited photo from the Fujifilm GFX100 II into the app and it reads the shutter count from the file's metadata. No cable needed.
Note: the count in a Fujifilm GFX100 II photo can reset. A Fujifilm photo can only show a count up to 32,767. Then the count starts again at 0. Your Fujifilm GFX100 II keeps the full lifetime count in the camera body. For that count, use the USB read.
- 01Find any original photo from the body (not re-exported).
- 02Drag it onto the Check panel.
- 03The count appears immediately.