PowerShot SX70 HS

Your PowerShot SX70 HS is tested and verified to work with our app. Download it, plug the camera in over USB, and you'll get a result.

Buy a licence to see your result.
Licences start from $5.99

Released September 2018 Rated 100,000 actuations Method USB

Download

Requires Windows 10 or 11, or macOS 11.7.11 or later

Canon

Via USB

32,735 Shutter count

33% used of 100,000 rated

32,735

33% used of 100,000 rated

Right in the middle of the pack.

Typical range20,000 – 63,000

Get your shutter count

USB

Connect the Canon PowerShot SX70 HS to your computer with a USB cable and the app reads the exact actuation count straight from the camera.

01In the camera menu, set Wireless communication settings → Wi-Fi settings → Wi-Fi to Disable before connecting the USB cable. Leave it off during the USB check.
02Connect the camera to your computer with a USB data cable, straight into the computer rather than through a hub, and turn the camera on. This camera takes a Micro-USB cable.
03Open Camera Shutter Count and go to Check.
04When it shows Connected via USB, select Check.
05The count appears in the result card.

Check this camera from $5.99

Buy the app