Cameras / Canon EOS R3
Canon

EOS R3

Your EOS R3 is tested and verified to work with our app. Download it, plug the camera in over USB, and you'll get a result.

Buy a licence to see your result.
Licences start from $5.99

Released September 2021 Rated 500,000 actuations Method USB

Requires Windows 10 or 11, or macOS 11.7.11 or later

Successfully tested on camera firmwares

  • 2.0.0
  • 2.1.0
Canon

EOS R3

Via USB
≤256,000 Shutter count
≤51% used of 500,000 rated Reported in 1,000-shot steps
S/N9759333008 CheckedNovember 05, 2026 · 18:33
Canon

EOS R3

S/N9759333008

Shutter count

≤256,000
≤51% used of 500,000 rated

Reported in 1,000-shot steps

Mechanical shutter≤256,000
Electronic shutter~1,024,000

Compared

Right in the middle of the pack.

Typical range100,000 – 315,000
USB · fw 2.0.0 05 Nov 26
Camera reading card. Activate to flip it over

Get your shutter count

USB

USB direct read

Connect the Canon EOS R3 to your computer with a USB cable and the app reads the exact actuation count straight from the camera.

  1. 01In the camera menu, set Airplane mode to On before connecting the USB cable. This turns the camera's Wi-Fi off. Keep it that way during the USB check.
  2. 02In the camera menu, set Choose USB connection app to Photo Import/Remote Control.
  3. 03In the camera menu, set Time-lapse movie to Disable.
  4. 04Connect the camera to your computer with a USB data cable, straight into the computer rather than through a hub, and turn the camera on. This camera takes a USB-C cable.
  5. 05Open Camera Shutter Count and go to Check.
  6. 06When it shows Connected via USB, select Check.
  7. 07The count appears in the result card.
Check this camera from $5.99
Buy the app

Different Canon body?