PowerShot V1
Via USB
≤23,000
Shutter count
Reported in 1,000-shot steps
Canon
PowerShot V1
Your PowerShot V1 is tested and verified to work with our app. Download it, plug the camera in over USB, and you'll get a result.
Buy a licence to see your result.
Licences start from $5.99
Requires Windows 10 or 11, or macOS 11.7.11 or later
Successfully tested on camera firmwares
- 1.1.0
- 1.2.0
PowerShot V1
Shutter count
≤23,000
Canon reports this camera's count in 1,000-shot steps.
Compared
Lightly used. Most others have shot more.
Typical range30,000 – 95,000
Get your shutter count
USB
USB direct read
Connect the Canon PowerShot V1 to your computer with a USB cable and the app reads the exact actuation count straight from the camera.
- 01In the camera menu, set Wi-Fi settings → Wi-Fi to Disable before connecting the USB cable. Leave it off during the USB check.
- 02In the camera menu, set Choose USB connection app to Video calls/streaming.
- 03In the camera menu, set Time-lapse movie to Disable.
- 04Connect the camera to your computer with a USB data cable, straight into the computer rather than through a hub, and turn the camera on. This camera takes a USB-C cable.
- 05Open Camera Shutter Count and go to Check.
- 06When it shows Connected via USB, select Check.
- 07The count appears in the result card.
Check this camera from
$5.99
Buy the app