Rebel SL3
Via USB
≤33,000
Shutter count
≤33% used of 100,000 rated
Reported in 1,000-shot steps
Canon
Rebel SL3
Also known as EOS 250D · Kiss X10 · EOS 200D II
Your Rebel SL3 is tested and verified to work with our app. Download it, plug the camera in over USB, and you'll get a result.
Buy a licence to see your result.
Licences start from $5.99
Requires Windows 10 or 11, or macOS 11.7.11 or later
Successfully tested on camera firmwares
- 1.0.0
- 1.0.1
- 1.0.2
- 1.0.3
- 1.0.4
- 1.0.5
Rebel SL3
Shutter count
≤33,000
≤33% used of 100,000 rated
Canon reports this camera's count in 1,000-shot steps.
Compared
Right in the middle of the pack.
Typical range20,000 – 63,000
Get your shutter count
USB
Wi-Fi
USB direct read
Connect the Canon EOS 250D to your computer with a USB cable and the app reads the exact actuation count straight from the camera. Most accurate method. Works even when photos have had their EXIF stripped.
The app can also read the Canon EOS 250D over Wi-Fi instead of a cable. Put the camera on the same network as your computer, then run the check as usual.
- 01Turn the body on, USB cable into the side.
- 02Open Camera Shutter Count → Check.
- 03Wait for the body to enumerate (approx. 1 second).
- 04The count appears in the result card.
Check this camera from
$5.99
Buy the app