EOS R6 Mark III

Your EOS R6 Mark III is tested and verified to work with our app. Download it, plug the camera in over USB, and you'll get a result.

Buy a licence to see your result.
Licences start from $5.99

Released October 2025 Rated 400,000 actuations Method USB

Download

Requires Windows 10 or 11, or macOS 11.7.11 or later

Successfully tested on camera firmwares

Canon

Via USB

≤205,000 Shutter count

≤51% used of 400,000 rated Reported in 1,000-shot steps

≤205,000

≤51% used of 400,000 rated

Canon reports this camera's count in 1,000-shot steps.

Right in the middle of the pack.

Typical range80,000 – 255,000

Get your shutter count

USB

Connect the Canon EOS R6 Mark III to your computer with a USB cable and the app reads the exact actuation count straight from the camera.

01In the camera menu, set Wi-Fi settings → Wi-Fi to Disable before connecting the USB cable. Leave it off during the USB check.
02In the camera menu, set Choose USB connection app to Photo Import/Remote Control.
03In the camera menu, set Time-lapse movie to Disable.
04Connect the camera to your computer with a USB data cable, straight into the computer rather than through a hub, and turn the camera on. This camera takes a USB-C cable.
05Open Camera Shutter Count and go to Check.
06When it shows Connected via USB, select Check.
07The count appears in the result card.

Check this camera from $5.99

Buy the app