EOS 5DS
Your EOS 5DS is tested and verified to work with our app. Download it, plug the camera in over USB or connect it over Wi-Fi, and you'll get a result.
Buy a licence to see your result.
Licences start from $5.99
Requires Windows 10 or 11, or macOS 11.7.11 or later
Successfully tested on camera firmwares
- 1.0.1
- 1.1.0
- 1.1.2
- 1.1.3
- 1.1.4
EOS 5DS
Shutter count
Compared
Right in the middle of the pack.
Get your shutter count
USB direct read
Connect the Canon EOS 5DS to your computer with a USB cable and the app reads the exact actuation count straight from the camera.
- 01If you own one, take the W-E1 Wi-Fi adapter out of the camera's SD card slot before connecting the USB cable. The camera can't use the cable while it is in.
- 02In the camera menu, set Time-lapse movie to Disable.
- 03Connect the camera to your computer with a USB data cable, straight into the computer rather than through a hub, and turn the camera on. This camera takes a USB 3.0 Micro-B cable.
- 04Open Camera Shutter Count and go to Check.
- 05When it shows Connected via USB, select Check.
- 06The count appears in the result card.
Wi-Fi read
The app can also read the Canon EOS 5DS over Wi-Fi instead of a cable.
Wi-Fi on this body needs the optional Canon W-E1 adapter, which is sold separately.
- 01In Camera Shutter Count, go to Settings > Check and turn on Wi-Fi Camera Discovery.
- 02In Camera Shutter Count, select Connect, then Step-by-step setup. The app walks you through the steps below.
On the camera
- 03Requires a W-E1 in the SD slot and firmware 1.1.0 or later. Use a CF card for photo storage.
- 04Unplug the USB cable. The camera's Wi-Fi menu doesn't work while a cable is connected.
- 05Press MENU and go to Wi-Fi function > Remote control (EOS Utility).
- 06Select Easy connection.
- 07The camera now shows a network name (SSID) and a password. Leave that screen showing.
On this computer
- 08Open this computer's Wi-Fi settings. Choose the network name the camera shows and enter the password the camera shows.
That network has no internet. That's normal: stay on it until the reading is done.
Connect to the camera
- 09Windows Close EOS Utility and Photos first. Another app connected to the camera blocks the reading.
macOS Quit EOS Utility, Image Capture and Photos first. Another app connected to the camera blocks the reading. - 10On the camera, select OK.
- 11The camera then shows six characters. They're part of its MAC address, so there's nothing to type.
- 12In Step-by-step setup, click Connect while the camera shows that screen.
- 13When the camera asks to connect to this computer, select OK.
After the reading, the camera may show a connection error. The reading is already saved.
When you're done, select Disconnect,exit on the camera and rejoin your usual Wi-Fi network.
On the camera
- 03Requires a W-E1 in the SD slot and firmware 1.1.0 or later. Use a CF card for photo storage.
- 04Unplug the USB cable. The camera's Wi-Fi menu doesn't work while a cable is connected.
- 05Press MENU and go to Wi-Fi function > Remote control (EOS Utility).
- 06Select Select a network.
- 07Choose your Wi-Fi network on the camera and enter its password there.
- 08Select Auto setting.
On this computer
- 09Make sure this computer is on the same Wi-Fi network as the camera.
Connect to the camera
- 10Windows Close EOS Utility and Photos first. Another app connected to the camera blocks the reading.
macOS Quit EOS Utility, Image Capture and Photos first. Another app connected to the camera blocks the reading. - 11Keep the camera on its connection screen. In Step-by-step setup, click Connect once the camera is found.
- 12When the camera asks to connect to this computer, select OK.
After the reading, the camera may show a connection error. The reading is already saved.
When you're done, select Disconnect,exit on the camera and rejoin your usual Wi-Fi network.