X100VI
Via USB
41,754
Shutter count
14% used of 300,000 rated
Fujifilm
X100VI
Your X100VI is tested and verified to work with our app. Download it, plug the camera in over USB or drop in a photo, and you'll get a result.
Buy a licence to see your result.
Licences start from $5.99
Requires Windows 10 or 11, or macOS 11.7.11 or later
X100VI
Shutter count
41,754
14% used of 300,000 rated
Compared
Lightly used. Most others have shot more.
Typical range60,000 – 190,000
Get your shutter count
USB
USB direct read
Connect the Fujifilm X100VI to your computer with a USB cable and the app reads the exact actuation count straight from the camera.
- 01Connect the camera to your computer with a USB data cable, straight into the computer rather than through a hub, and turn the camera on.
- 02Open Camera Shutter Count and go to Check.
- 03Follow the on-screen guide in the app for your Fujifilm X100VI.
- 04The count appears in the result card.
EXIF
EXIF file drop
Drop any unedited photo from the Fujifilm X100VI into the app and it reads the shutter count from the file's metadata. No cable needed.
Note: the count in a Fujifilm X100VI photo can reset. A Fujifilm photo can only show a count up to 32,767. Then the count starts again at 0. Your Fujifilm X100VI keeps the full lifetime count in the camera body. For that count, use the USB read.
- 01Find any original photo from the body (not re-exported).
- 02Drag it onto the Check panel.
- 03The count appears immediately.
Check this camera from
$5.99
Buy the app